Renovation- Ideal 4000

Ideal 4000 renovation - the renovation framework system can be used to install windows without removing old frames. We offer two renovation fins: 20mm, 40 mm or 65 mm. Thanks to this solution, you have the option of trimming the renovation flange, but you must remember that the minimum trimming is 10 mm. The frame is specially lowered to compensate for the loss of glazing surface caused by leaving the old structure. Window installation will not be a problem for you because it is fast and easy. You will not have to dismantle your old joinery at your client's, so that the facade and walls will remain without damage. The door frames that would require tearing are completely covered with a renovation fin from the inside, and from the outside, the old frame is covered by the flat bar you choose. You can add top-mounted roller shutters to windows with a renovation frame. To make it possible, in this case, the upper renovation fin must be cut off. It is not necessary to shear the fin when choosing an external roller blind. System masking profiles, such as flat bars and angles, can also be adapted to the window with the renovation frame, and an external window sill can be mounted, which is specially adapted for the renovation frames. The wide range of Aluplast veneers will emphasize the individuality of the window and door joinery that you mount with your customers.

All available cross-sections can be found here.